Go to Main Site Diff'rent Strokers
For fans of oddball two-strokes everywhere
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Classic Bike Trackdays

My LC Hybrid Project

 
Post new topic   Reply to topic    Diff'rent Strokers Forum Index -> Yamaha
View previous topic :: View next topic  
Author Message
seanrd



Joined: 14 Oct 2010
Posts: 15

PostPosted: Thu Oct 21, 2010 3:52 pm    Post subject: My LC Hybrid Project Reply with quote

Well here we go again another project, big bike this time, well biggest I own, can’t even ride it till October 6th 2012 when my restricted licence gets lifted and I can have more than a whopping 33bhp.

Number one, take one 31k remove engine, sell the rest of the parts to pay for a 4LO rolling chassis.




0.5 Over sized so plenty more life left, no gaskets just sealant, so it was great fun stripping it down stuffs like bloody super glue.



Non tuned/butchered so these will be off to Mick Abbey for some fettling



A very low sitting fiesta, but why?



Oh, that would be why





Might just buy a new wiring loom 



Loosely together


Who needs centre stand lugs anyway?



KR1S Front End to replace the 125 USD’d that are fitted



TZR125 4DL Rad





That’s all for now, hope to get the KR1S front end in next week, getting a 3MA swing arm next week as well so I’ll start the long process of getting that all jigged up in the frame ready for the new shock mounts.

Sean
Back to top
View user's profile Send private message
GARY-RD-ROBBO



Joined: 24 Oct 2010
Posts: 26
Location: wakefield up north tha nos

PostPosted: Tue Oct 26, 2010 7:21 pm    Post subject: Reply with quote

dont ya just love the orange instant gasket..... Laughing Laughing Laughing Laughing Laughing Laughing Laughing


must of forgot the tip..."thin smear" Shocked Shocked Shocked

looks like a bag of worms sean.... Laughing Laughing Laughing
Back to top
View user's profile Send private message
seanrd



Joined: 14 Oct 2010
Posts: 15

PostPosted: Tue Oct 26, 2010 7:28 pm    Post subject: Reply with quote

Changed a bit today, got the KR1s front end, just need to machine a spacer for the stem then thats done. Measured up nearly everything for the 3MA swingarm aswell but to be sure ive orderd a 300mm set of vernier calipers, then its off to the milling machine for some butchery Embarassed
Back to top
View user's profile Send private message
BenR



Joined: 24 Aug 2009
Posts: 59

PostPosted: Tue Oct 26, 2010 8:26 pm    Post subject: Reply with quote

You not tempted to use an RGV front & rear setup?
Back to top
View user's profile Send private message
seanrd



Joined: 14 Oct 2010
Posts: 15

PostPosted: Tue Oct 26, 2010 8:41 pm    Post subject: Reply with quote

Fraid not Ben, it's been done to death and RGV bits are getting seriously expensive now Crying or Very sad
Back to top
View user's profile Send private message
vapourmate



Joined: 02 Dec 2009
Posts: 27
Location: Hull east yorkshire

PostPosted: Thu Oct 28, 2010 9:55 pm    Post subject: Reply with quote

Hows she coming on now matey! Very Happy
_________________
www.ajsvapourclean.com
Back to top
View user's profile Send private message
seanrd



Joined: 14 Oct 2010
Posts: 15

PostPosted: Mon Nov 22, 2010 5:46 pm    Post subject: Reply with quote

Right long time since a proper update so here we go....

Worked hard over halloween as you can see Smile


For the TZR, smells rather good


Stipped down


New swing arm spacer on the saw


New clutch window made up, o rings, and bolts. Pressure turned on the lathe at college


Swing arm being machined, 10.8mm off each side to squeeze in the LC frame


In the night garage
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Diff'rent Strokers Forum Index -> Yamaha All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group.  Installed, administered and modified by  Diff'rent Strokers © 2006-2024.