Diff'rent Strokers

curryhouse · Joined: 08 Apr 2009 Posts: 5 Location: cambridge

hi the power valve motor has stopped working, when i turn the key there is no movement, its the same engine as the tzr 250, anybody got any ideas what i do next.

Flounders · Joined: 12 Dec 2008 Posts: 92 Location: York Shire

Check you have power at the motor when you first turn the ignition on,
I should have a motor if you need one.

curryhouse · Joined: 08 Apr 2009 Posts: 5 Location: cambridge

hi, when i turn the the key its dead , can i just replace the motor, how do i know if i have power to the motor.
David

Flounders · Joined: 12 Dec 2008 Posts: 92 Location: York Shire

Sounds like you need to check your battery first. Get a volt meter.
Check the current across the terminal for a reading, do the same with it running and compare voltages. Running should give a higher voltage,

fredjee · Posted: Sun May 17, 2009 8:51 am Post subject:

Sounds a stupid question but when you turn the key and the powervalve motor wont turn is anything working ..... lights .... horn ..... etc ?
If not then your batterys dead ???
My yellow R1-Z drains the battery over a week if left standing its to do with regulator / rectifier but im a tight sod so just diss connect it each time bikes left standing for long periods Very Happy

Will your bike start ??? If it doe's do you see any movement from powervalve motor then ???

Fred.

PS .... Did you get any joy with your wanted R1-Z stuff from Moriwaki Man or Drewski ???

I just had some stuff from Drewski who brought ..... payed .... shipped within a month direct from Japan and i'm sure he lives in or near Cambridge Smile

_________________
It's never ever finished !