| View previous topic :: View next topic |
| Author |
Message |
chris wilson
Joined: 14 Dec 2009
Posts: 7
Location: United Kingdom
|
 Posted: Fri Jul 02, 2010 7:08 pm Post subject: ypvs help needed |
 |
|
i im looking for any advice on a problem im having with my ypvs.
i can only get it to run on 1 cylinder at a time ,if i take any ht lead of and put a plug in that cap the other cylinder will fire ok first or 2nd kick. same when i swap them over but will not run together ,ive put 2 new plugs in in case they were bad but no joy.
any ideas would be much appreciated 
_________________
chubba81 |
|
| Back to top |
|
 |
greengoatchoker
Joined: 11 Jul 2007
Posts: 38
|
| Posted: Sat Jul 03, 2010 12:44 am Post subject: |
|
|
well assuming when you swap the ht lead the problem follows . probably a damaged ht lead or cap not connected to cable properly . that would be where i would start
_________________
a pig in the dark is still a pig |
|
| Back to top |
|
|
chris wilson
Joined: 14 Dec 2009
Posts: 7
Location: United Kingdom
|
| Posted: Sat Jul 03, 2010 7:02 am Post subject: |
|
|
both leeds work independently the left 1 runs with right leed out and a plug on the frame and the right one with left out both give a good spark from the plug thats out and other cylinder runs .
_________________
chubba81 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
