View previous topic :: View next topic |
Author |
Message |
Top-shaggy Show Star !
Joined: 05 Mar 2011 Posts: 1757 Location: Derbyshire
|
Posted: Sat Jan 19, 2013 5:18 pm Post subject: Ysr80 car to airbox rubber |
|
|
Can anyone suggest a suitable replacement for the offending one on my bike as its perished and split?
The one on the bike is bigger than standard.
Bottom rubber is the standard one!
The air box has the Team Calamari (TC) uni vents and a race carb has been fitted..
It's not that much bigger in the slide but it certainly is on the inlet.. Hmmm next on to the TC site for some parts?
Nothing available on the TC site so best take some measurements then...
@rse - No reference numbers on the rubber
Email sent to TC and fingers crossed I can find something...
Really don't want to ditch the airbox for a ram air unless I really have too
Ok - temporary option - can it be repaired?
The rubber looks ok in the pictures but its cracked all round where the clip band holds it and its also come apart on the seam. Luckily I have some rubber glue so that's gonna have to do for now..
Oh... And I need a new filter as the one inside was totally knackered
Some pictures of the temporary repair
Now leave the rubber glue to dry.. Takes 24-48 hours to cure so put in near the fan heater to accelerate the cure and on the search for a new one if I can find one..
Bit of a bummer but at least it gave me a chance to clean up some of the wiring and the JDM rear set up.
Waiting to see if TC can help now.
In the meantime don't hold back guys on any help or suggestions for an alternative yamaha rubber inlet? _________________ We are where we are... |
|
Back to top |
|
|
SP_BOTT
Joined: 12 Oct 2007 Posts: 176 Location: Norfolk
|
Posted: Sat Jan 19, 2013 6:07 pm Post subject: |
|
|
Just had a look on fleabay, as I'm sure you have too, some of the Suzuki motocross bikes look to have stepped carb rubbers, similar to what your looking for (RM/PE/TS etc etc) |
|
Back to top |
|
|
Top-shaggy Show Star !
Joined: 05 Mar 2011 Posts: 1757 Location: Derbyshire
|
Posted: Sun Jan 20, 2013 4:55 pm Post subject: |
|
|
SP_BOTT wrote: |
Just had a look on fleabay, as I'm sure you have too, some of the Suzuki motocross bikes look to have stepped carb rubbers, similar to what your looking for (RM/PE/TS etc etc) |
Thanks for looking.
Going to have another look for something similar tonight.
Repaired the old one and the rubber glue seems quite strong.
Still want to find another new replacement one though if I can _________________ We are where we are... |
|
Back to top |
|
|
Top-shaggy Show Star !
Joined: 05 Mar 2011 Posts: 1757 Location: Derbyshire
|
|
Back to top |
|
|
fletch
Joined: 21 Apr 2012 Posts: 288 Location: Essex
|
Posted: Sun Jan 20, 2013 6:23 pm Post subject: |
|
|
A lot of parts suppliers often use a genaric pic in there listings not pic of actual item as its easier for them to list |
|
Back to top |
|
|
Gillinghampaul
Joined: 15 Aug 2012 Posts: 655 Location: Kent
|
Posted: Sun Jan 20, 2013 6:24 pm Post subject: |
|
|
I would be asking that seller of some closer pics for sure! _________________ Gagging for it |
|
Back to top |
|
|
Top-shaggy Show Star !
Joined: 05 Mar 2011 Posts: 1757 Location: Derbyshire
|
Posted: Sun Mar 17, 2013 12:50 pm Post subject: |
|
|
Well I got this a while ago now... But it's time to do some thing with it sooooooooooooo...........
DE DE DE DE DEEE DE DE DE DEEEEEEEEEE
Nooooo not the Retro Aftershave... Even though I have a liking for some cheesy things 70/80s/90s
The nice new Rubber Air box Manifold... Ohyesindeedie !!
I'm all made up now
Will fit this over the next couple days and get the bike ready for the MOT.
After all . . . It must stop raining
Surely it must stop raining...
Pleaseeee stop raining before I get too old _________________ We are where we are... |
|
Back to top |
|
|
Howie
Joined: 18 Oct 2009 Posts: 511 Location: Kwaksville
|
Posted: Sun Mar 17, 2013 4:25 pm Post subject: |
|
|
Its still raining TS |
|
Back to top |
|
|
fletch
Joined: 21 Apr 2012 Posts: 288 Location: Essex
|
Posted: Sun Mar 17, 2013 10:26 pm Post subject: |
|
|
I know how u feel Shaun I've not been able to work i my ysr for 3weeks now as waiting for paint then decals, hopefully next weekend i'm back on it &maybe get it MOT'd before easter Still can't find a silencer though |
|
Back to top |
|
|
|