|
Diff'rent Strokers For fans of oddball two-strokes everywhere
|
|
View previous topic :: View next topic |
Author |
Message |
rdeesa
Joined: 26 Apr 2007 Posts: 6 Location: JOHANNESBURG SOUTH AFRICA
|
Posted: Sun Apr 29, 2007 6:16 pm Post subject: Here's my new project |
|
|
I was out looking for fork seals for my nephew's Derbi 75cc when in the corner of the shop I sa a tatty Kr 250, I couldn't resist
Got home on the net and found Tim's KR 250 forum, a bit of seaarching unearthed a second bike and now by this weekend both were home:
The first bke I found was this one:
Needs quite a bit of work- seized a present
This is the second I found:
Wiring is a mess, will be doing a total stripdown and using this fram for the rebuild.
My other strokers are my RD 400:
I have a 350 LC as well.
This is my boys little stroker:
The last bike in my garage is this good diesel:
|
|
Back to top |
|
|
nzKRnut
Joined: 12 Feb 2007 Posts: 11 Location: NZ!!
|
Posted: Mon May 07, 2007 10:39 pm Post subject: oooohhh! 2 KR's! |
|
|
well done on ya new discovery of the worlds best 2stroke!! I'm over in NZ, and i've got three, 2 seized, and one needing rotary valves
I've discovered a home made big bore kit too, so i might just make a KR350...
nzKRnut... _________________ Josh - GP125, KDX200, RGV250 VJsomething. |
|
Back to top |
|
|
ScottaKR250
Joined: 24 Jul 2007 Posts: 11 Location: Melbourne, Australia
|
Posted: Tue Jul 24, 2007 2:08 pm Post subject: Re: oooohhh! 2 KR's! |
|
|
nzKRnut wrote: |
I've discovered a home made big bore kit too, so i might just make a KR350...
nzKRnut... |
A big bore kit for KR's.........
That's just what I need.....
So,... do I have to sell a kidney for this?
And if so, which one???????
Please PM me with details if possible.
Your eternally greatful servant,
ScottaKR250. |
|
Back to top |
|
|
nzKRnut
Joined: 12 Feb 2007 Posts: 11 Location: NZ!!
|
Posted: Thu Aug 09, 2007 4:43 am Post subject: Re: oooohhh! 2 KR's! |
|
|
ScottaKR250 wrote: |
nzKRnut wrote: |
I've discovered a home made big bore kit too, so i might just make a KR350...
nzKRnut... |
A big bore kit for KR's.........
That's just what I need.....
So,... do I have to sell a kidney for this?
And if so, which one???????
Please PM me with details if possible.
Your eternally greatful servant,
ScottaKR250. |
I'll have the left one thanks!
You need a knackered set of barrels, a lathe, some cast iron sleeves, a cylinder plating mate, 2 IT175 pistons, rings, gudgeon pins, circlip and the like...
Then, well thats all i know!
Josh _________________ Josh - GP125, KDX200, RGV250 VJsomething. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|