![Go to Main Site](templates/subSilver/images/logo_phpBB.gif) |
Diff'rent Strokers For fans of oddball two-strokes everywhere
|
![Classic Bike Trackdays](templates/subSilver/images/CBT_banner.gif) |
View previous topic :: View next topic |
Author |
Message |
Coffeebaron
Joined: 02 Aug 2013 Posts: 31 Location: Lancaster, Lancashire
|
Posted: Mon Aug 05, 2013 9:03 pm Post subject: Coffeebaron's sweet lil espreso project |
|
|
Hi to all the 2 smokers here, I've been out of the 2 stroke scene for some years now under a delusion that 4 strokes are more reliable and less costly....yeah... In the past i've owned a Cagiva Planet, an RS125 (my all time favourite bike I've owned after 14 years on the rode and some 20+ bikes later) and had the pleasure of trying a close friends 3XVsp (AMAZING)
So since that fog cleared, i've decided to place my head in the blue clouds again
I've currently got a 1994 rs125 extrema, the real one with the rectangular headlight and full power rotax 123. It's currently in pieces awaiting some more financial injections to move it on, but i'm in no hurry.
Here we go with the pics!
yep, these pics are pretty lousy I know, but bear with me this was the state it was in when I got it- £450 and it's a runner.
So I begun to strip it down, and this is the condition it was in...
The overall condition wasn't too bad- the bike had been in storage in spain for over a decade, where upon the owner had it imported back to the uk and was left at a dealers to sell. Most of the problems the bike has are a leaking fuel tank from the pet cock, the front forks are weeping, and the exhaust is rotten. Said exhaust is a period piece Arrow, and i'm in the process of having it reconditioned as the newer pipes don't offer up to the 123 barrel.
So I decided to check the engine anyway- top end off and piston removed- a miracle, the crank and bottom end were in good condition! no water damage, no play!
I rebuilt the top end, and had the frame and swingarm sandblasted and powder coated.
And this is where I'm at, I'm hoping to be able to purchase a new rear shock and the fork rebuild kit so I can get it back as a rolling chasis this winter
I'll post more as I do it!
In the mean time I'm going to be haunting the NSR section and NSRworld as I'm looking to trade in my current ride-CBR600RR- for an MC18 once it arrives in on the next crate from Japan! Time to be a full time 2 stroke rider again! _________________ Must remember, keep the clutch covered....your not on a 4 stroke now. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
StrokerBoy Show Star !
![Show Star ! Show Star !](images/showstar.gif)
![](http://kr250.org/graphics/KR_orglogo.jpg)
Joined: 15 Nov 2006 Posts: 1293 Location: Oop North, UK
|
Posted: Mon Aug 05, 2013 9:29 pm Post subject: |
|
|
Welcome ! Four-strokes are fine but you can't beat the real thing. ![Clap](images/smiles/clap.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Top-shaggy Show Star !
![Show Star ! Show Star !](images/showstar.gif)
![](http://i1197.photobucket.com/albums/aa428/Top-shaggy/27d7f7e9.jpg)
Joined: 05 Mar 2011 Posts: 1757 Location: Derbyshire
|
Posted: Tue Aug 06, 2013 12:33 am Post subject: |
|
|
Great to have you on board Coffeebaron ![Very Happy](images/smiles/icon_biggrin.gif) _________________ We are where we are... |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Coffeebaron
Joined: 02 Aug 2013 Posts: 31 Location: Lancaster, Lancashire
|
Posted: Tue Aug 06, 2013 8:55 pm Post subject: |
|
|
ta for the welcome messages guys I'll hopefully have some more to post as money allows, sadly my job as a parts guy at the local dealer doesn't pay a fortune ...and it's not an aprilia dealer lol _________________ Must remember, keep the clutch covered....your not on a 4 stroke now. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mikee
Joined: 16 Aug 2008 Posts: 77 Location: THE NORTH
|
Posted: Fri Aug 30, 2013 9:47 pm Post subject: |
|
|
Looks like a good start
Got a mito that I'm tidying up at the moment
Mike |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Coffeebaron
Joined: 02 Aug 2013 Posts: 31 Location: Lancaster, Lancashire
|
Posted: Sat Aug 31, 2013 9:36 am Post subject: |
|
|
Ta Mike, i've finally ordered a rear shock and the fork seals, oil seals etc in order to rebuild and fix a leak. May finally get it back into a rolling chasis before christmas!
Nice to hear about the Mito, was thinking about one of them myself as another bike/project. My friend had a 7 speed evo years ago, quality bikes with great handling, though I was much happier on the Aprilia. _________________ Must remember, keep the clutch covered....your not on a 4 stroke now. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Howie
![](http://www.avatarsdb.com/avatars/foghorn_leghorn_think.jpg)
Joined: 18 Oct 2009 Posts: 511 Location: Kwaksville
|
Posted: Sat Sep 07, 2013 6:50 pm Post subject: |
|
|
Hi CB,
Good to know i'm not the only one who loves Rs125's.
I'm currently building one from parts, I would say its 80% complete at the mo but once I have it up & running, it will like yours be stripped back & erm...... restored? refurbed? not sure what to call it.
But I need your help fella, with the wiring loom & in particular its route.
It was only a few weeks back that I serviced two of the buggers, one a 99 model (like mine) & one a 01 model (also like mine )
But can I remember the loom routing
Any pics or descriptions you can provide will be appreciated. I have studied the pics you have already posted but it must be my eyes, cos I can't for the life of me make it out
Cheers in advance |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Coffeebaron
Joined: 02 Aug 2013 Posts: 31 Location: Lancaster, Lancashire
|
Posted: Mon Sep 09, 2013 10:33 pm Post subject: |
|
|
Hey Howie!
Hope this isn't too late- been busy sorting bike funds to get another bike.
I'll have a check and see where mine routed, however could take a touch of time. If memory serves, the loom runs to the left and down the frame. On my 1994 the Reg rec/ecu were on the tail tidy at the rear of the subframe, i'll see if i've any pics I can post with some marks on them.
Yeah I've such fond memories of the 02' RS i owned, had my best biking moments on it! I was doing this up to sell, but at the rate I'm going may just keep it.
I've just got a shock and the fork seals and carb gaskets etc, so soon going to update. _________________ Must remember, keep the clutch covered....your not on a 4 stroke now. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Coffeebaron
Joined: 02 Aug 2013 Posts: 31 Location: Lancaster, Lancashire
|
Posted: Mon Sep 09, 2013 10:39 pm Post subject: |
|
|
Correction, looked at pics- right hand side it runs down. _________________ Must remember, keep the clutch covered....your not on a 4 stroke now. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Howie
![](http://www.avatarsdb.com/avatars/foghorn_leghorn_think.jpg)
Joined: 18 Oct 2009 Posts: 511 Location: Kwaksville
|
Posted: Wed Sep 11, 2013 6:25 pm Post subject: |
|
|
Cheers CB, your help is much appreciated
Keep us all up to date with the build. As soon as I have a full bike, I will do the same.
If I get a moment, I'll pop some pics up of my bike. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Coffeebaron
Joined: 02 Aug 2013 Posts: 31 Location: Lancaster, Lancashire
|
Posted: Thu Sep 12, 2013 10:05 pm Post subject: |
|
|
Cheers Howie, once i've got my new bike sorted I will be resuming the worlds slowest refresh of an RS125
Would be great to see yours, hope to share trials and tribulations _________________ Must remember, keep the clutch covered....your not on a 4 stroke now. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Howie
![](http://www.avatarsdb.com/avatars/foghorn_leghorn_think.jpg)
Joined: 18 Oct 2009 Posts: 511 Location: Kwaksville
|
Posted: Fri Sep 13, 2013 7:36 pm Post subject: |
|
|
No worries CB,
I'm off to pick up a shed load more Rs parts tomorrow
My plan is to get the bike up & running, do the legal nonsense & ride like a looney. Then strip it back down & restore (I don't really like the word restore, for some reason it seems to have taken on a whole new meaning, which I do not get ), so it will be a strip down & erm,
refurb?
renew?
refresh?
What is it called when you just strip a bike back & without painting/powder coating/plating everything in sight, just fix the bits that are wrong?
Does anyone do that anymore? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Howie
![](http://www.avatarsdb.com/avatars/foghorn_leghorn_think.jpg)
Joined: 18 Oct 2009 Posts: 511 Location: Kwaksville
|
Posted: Sat Sep 14, 2013 8:37 pm Post subject: |
|
|
Well, picked up a load more parts for my rs today, just lacking a rear wheel, undertray & side panels now.
But after speaking to the fella I bought the parts off, well erm........ I may be eating my words about not restoring the bike
Having got home & had a good look through what I had bought & after seeing his almost immaculate rs, my mind naturally turned to powder coating & zinc plating.
Bugger, I thought, all I wanted to do was to fix one up & get it on the road & now...............bugger I too want an immaculate rs. Bugger!
And anyway, that top engine mount bracket could do with a quick clean................ ![Rolling Eyes](images/smiles/icon_rolleyes.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Coffeebaron
Joined: 02 Aug 2013 Posts: 31 Location: Lancaster, Lancashire
|
Posted: Sun Sep 22, 2013 8:33 pm Post subject: |
|
|
Haha, I know that feeling about 'restoring'
I started with grand ideas about creating either something different with a cafe racer look, then decided to just get it back to clean and original.....then I looked at how much it would cost
So back to your original idea of just fix and enjoy. I paid very little for it as was, and my goal was always to create a road legal running RS that I could always sell at a small profit....if I sold it.
I'll be interested to see where you take yours, please post some pics
I'm due to start again on mine in the next couple of weeks- been busy at the dealership this last few weeks and I've just bought my new daily ride...sadly didn't go for a 2 stroke, but got a bike i've been after for a while... _________________ Must remember, keep the clutch covered....your not on a 4 stroke now. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Coffeebaron
Joined: 02 Aug 2013 Posts: 31 Location: Lancaster, Lancashire
|
Posted: Thu Oct 03, 2013 3:18 pm Post subject: An update...and one to follow with pics. |
|
|
Well finally started some more work on the RS.
Got the seals for the forks, new circlips and set to dismantling and rebuilding them as per the haynes manual and my good friends prior knowledge.
For reference- anybody out there looking to rebuild the 1994 model, the forks are different to the 1995 onwards, as one side deals with dampening, one side the spring/compression, which causes the issue of the recommended oil levels being different to whats specified. Fortunately the stanchions have a hole cast in them, so the oil can only be filled so far.
I'm aiming to locate a workshop manual for the exterema at some point and check, but seems all went back together well and no more leaks
Also got the steering stem pressed back in with new bearings, so next stage is to buy more bearings to get the engine in and the wheels and swingarm back on!
Pics to follow soon ![Smile](images/smiles/icon_smile.gif) _________________ Must remember, keep the clutch covered....your not on a 4 stroke now. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|