View previous topic :: View next topic |
what might the problem be |
pistion rings |
|
0% |
[ 0 ] |
coil |
|
0% |
[ 0 ] |
plug wires |
|
0% |
[ 0 ] |
other |
|
100% |
[ 2 ] |
|
Total Votes : 2 |
|
Author |
Message |
ns250rider
Joined: 01 Nov 2007 Posts: 6
|
Posted: Wed Nov 14, 2007 9:36 pm Post subject: ns250r questions |
|
|
hey im new to the forum and i recently bought a ns250r mc11 ant the wind screen was broken and so wsa the speedo cable. does anyone know the part numbers or what modles they are like?? also it was working fine and then one day i went to start it and it wouldnt start so i put knew plugs in and thats not the problem. anyone know what the problem might be. i tought it might be the comression but cant out what the compression ratio is sopossed to be? |
|
Back to top |
|
|
andy2strokebolas Show Star !
Joined: 29 Dec 2006 Posts: 67 Location: uk somewhere
|
Posted: Thu Nov 15, 2007 11:26 pm Post subject: |
|
|
I will pm you the part numbers you need tomorow night.
Andy. |
|
Back to top |
|
|
andy2strokebolas Show Star !
Joined: 29 Dec 2006 Posts: 67 Location: uk somewhere
|
Posted: Fri Nov 16, 2007 9:43 pm Post subject: |
|
|
part numbers as follows
screen 64225-km4-305
speedo cable 44830-kn1-000 |
|
Back to top |
|
|
ns250rider
Joined: 01 Nov 2007 Posts: 6
|
Posted: Sat Nov 17, 2007 1:12 pm Post subject: |
|
|
cool thanks |
|
Back to top |
|
|
Alastair
Joined: 13 Jan 2007 Posts: 62
|
Posted: Tue Nov 20, 2007 8:47 pm Post subject: |
|
|
A goodly number of bits are the same as the NS400. I scanned the NS400 parts book and a copy can be found at www.ns400r.co.uk along with the workshop manual for the 400 which will give you compression numbers if you use the South african model numbers as the cylinders were common between the SA 400 and the NS250. _________________ Alastair
CBR1000RR6 (0 - Court in 2.5 seconds)
NS400RF
MTX80RFD |
|
Back to top |
|
|
ns250rider
Joined: 01 Nov 2007 Posts: 6
|
Posted: Sun Apr 06, 2008 11:31 pm Post subject: |
|
|
ok so now that it is gettin warm enough to work on my bike i found that there was no gas gettin to past the carbs so i took them a part and cleaned them but now it still wouldnt work so i traced the line and the fule pump is messed. i looked on that link but the fuel system only covvered carbs. ive been ookin for about an hour for a owners book online but cant find anything does anyone know of a site i could go to ? |
|
Back to top |
|
|
ns250rider
Joined: 01 Nov 2007 Posts: 6
|
Posted: Mon Apr 07, 2008 1:34 am Post subject: |
|
|
ok so tonight i was talkin to a guy who has a yzr 1000 and said he had an extra fule pump if i wanted to borrow it to see if it would work and it did. tomorrow im goin to the yammy dealer and orderin one bike is finally workin again cant wait to ride.. still lookin for a owners manual. even if you know where i can order one plz let me know
tyler[/img] |
|
Back to top |
|
|
|